55
Use and Maintenance Manual
ENGLISH
Repeats the outside rim eccentricity
measurement
Goes back to the measurement screen
Return to main screen
7. WHEEL DISMOUNTING
▪ Push the Zero Weight pedal. The carriage moves up to the wheel retrieval position.
▪ Push the tyre locking pedal to open the spindle.
▪ Push the Zero Weight pedal or push on the Zero Weight carriage lever to lower the carriage and dismount the
wheel.
If The Wheel hAs beeN mouNTed WIThouT usING The ZeRo WeIGhT lIfT, pushING The ZeRo WeIGhT pedAl AN eRRoR messAGe
WIll be dIsplAyed: dIsmouNT The Wheel WIThouT The AId of The lIfT IN The sAme WAy IT WAs mouNTed.
The Wheel mouNTING/dIsmouNTING opeRATING loGIc ImplIes ThAT The Wheel be mouNTed ANd dIsmouNTed
usING The lIfT ANd NoT by hANd.
Use of the wheel balancing machine
To Next Page
Loading...