53
Use and Maintenance Manual
ENGLISH
6.16 OUTSIDE RIM RUNOUT
mouNT oNly The RIm WIThouT The TyRe.
Press the button after closing the spindle.
Confirm
Goes back to the measurement screen
Return to main screen
Close the guard and press the button
The machine automatically reads the rim dimensions and performs a spin.
During rotation the outside eccentricity measurement is executed on the inner and outer edges of the rim
in the positions laid down by the international standards.
When complete, a screen with the graphs of the values just measured is displayed.
Use of the wheel balancing machine
To Next Page
Loading...