Hoffmann Megaplan Megaspin - Page 32

32
Ver. 04-2015
Use and Maintenance Manual
ENGLISH
In the case of directional wheels, i.e. which can be mounted only on the right or only on the left, press the
button
to set the direction:
▪ Left
▪ Right
▪ Left/right
The machine changes and immediately displays the new mounting order.
The wheel mounting order is established based on the residual radial eccentricity value of
each wheel.
To manually set the order of the wheels press
+ :
drag one wheel at a time to the desired position on the vehicle drawing and drop it
when the edges turn green
resets the manual setting
confirms manual setting
cancels manual setting
AT eAch uNbAlANce RecAlculATIoN, The TyRe seT seTTING Goes bAcK To beING bAsed oN The Wheel RuNouT.
Use of the wheel balancing machine