22 Safety Information
Instructions before commissioning
Risk of injury from incorrect pressure measurement!
Nebulizing or humidification can increase the resistance of
respiratory system filters. The user must regularly examine the
respiratory system filter for increased resistance and blockage
to ensure delivery of the therapeutic pressure.
• A device that is not functioning properly may endanger the patient or the person
operating the device. If the device does not start properly, or if the self-tests
performed automatically on start-up fail to be completed successfully, the device
must not be used. Please notify the service company in such a case.
•
Do not switch the device on if it has previously been in a very cold environment.
Wait about 1 hour to allow the temperature to adjust.
• Check the filter cassette regularly. Never use the device without the filter cassette.
•
Clean your mask system regularly and check all accessories, particularly the therapy
tube, mask and headgear. When doing this, observe the manufacturer’s safety
and cleaning instructions.
• Position the device in such a way that the power plug is easily accessible and can
be unplugged quickly in the event of a hazard.
•
Do not use the device if the housing or cable of the device or power supply unit
is damaged.
To Next Page
Loading...
