Operating the Device 51
Description of parameters
Language
The device can display messages in German (DEU), English (ENG), Greek (ELL), Spanish
(SPA), French (FRA), Italian (ITA), Dutch (NLD), Turkish (TUR), Polish (PLK), Portuguese
(POR) and Czech (CZE).
Setting the language
1. Select the complete menu (see page 47).
2. Use the selection keys and to select Language.
3. Set the desired language by pressing the enter key .
P-Unit
The device can show the pressure in the pressure units hectopascal (hPa), millibar (mbar),
and centimeters of water (cm = cmH
2
O).
Setting the pressure unit
1. Select the complete menu (see page 47).
2. Use the selection keys and to select P-Unit.
3. Set the desired pressure unit by pressing the enter key .
Operating times
Under this menu item you will find the total operating time including standby mode of
the device, the blower running time, the operating time of the filter and the therapy time.
Checking the device‘s operating times
1. Select the complete menu (see page 47).
2.
Use the selection keys and to select Power. The total operating time
including standby is now displayed.
3. Press the enter key . The total running time of the blower is now displayed.
4. Press the enter key again. The operating time of the filter is now displayed.
5. Press the enter key again. The therapy time is now displayed
To Next Page
Loading...
