34 Commissioning
Using oxygen
Risk of fire and burns!
Oxygen sources should be at a distance of more than 1 m
from the device in order to avoid the risk of fires and burns.
Please note:
• Before using oxygen, the safety instructions as of page 23 must be read.
• The use of oxygen affects the therapeutic pressure. For this reason, we recommend
the use of oxygen already during the titration process.
•
If the device is in standby mode or switched off, the oxygen supply must always
be switched off.
When supplying oxygen, please use a kink-resistant tube made of a medically appro-
ved material. In order to prevent back flow of oxygen into the device, we recommend
the use of an O
2
pressure valve.
Supplying oxygen directly in the mask
Mask
Therapy
tube
O
2
pressure valve
O
2
source
To Next Page
Loading...
