Commissioning 35
Supplying oxygen via an adapter
Mask
Therapy
tube
O
2
pressure valve
O
2
supply
adapter
O
2
source
The O
2
supply adapter and O
2
pressure valve you can order as accessory (see page 98).
Starting the supply of oxygen
1. Before starting the treatment, check that the tube connections are fitted correctly.
2.
Check whether the automatic mode is set to „Auto OFF“. If not, program it as
described on page 66.
3. First switch the device on, and then the oxygen supply.
Stopping the supply of oxygen
1. Stop the oxygen supply before switching off the device.
2. Allow the therapy to continue for several respiratory cycles.
3. Stop the therapy.
To Next Page
Loading...
