Operating the Device 47
The point 2 has two different menus:
• Standard menu
• Complete menu
The standard menu contains the menu items relevant to patients. The complete menu
contains all menu items of the standard menu as well as all menu items required for set-
ting the therapy. This menu is primarily intended for physicians and trained medical staff.
To switch between the menus, first press the enter key . Then hold both the selec-
tion keys and down at the same time for a prolonged period. The display
shows the message:
or
Please note: If during programing you have not pressed a key for 30 seconds, the
standard or complete menu exits automatically for security reasons. If a modified
value is not confirmed by pressing the enter key and the standard or complete menu
has exited, the original value is retained.
To access a menu, hold down the enter key for longer than 1 s. You can access the
menu items within menus by pressing the selection keys or . To activate a para-
meter, press the enter key .
Some parameters may only be set by physicians or trained medical staff. These para-
meters are protected by a PIN code.
Please note: Please do not try to crack the PIN code. Speak to your physician if you
doubt the correctness of the pressure prescription.
To Next Page
Loading...
