-13-
1
1
1 1
2
2
2 2
Unfold the transmitter
Fold the transmitter
9.2 Transmitter Battery
USB Adapter
(5V/2.0A)
Power Bank
1) When the transmitter battery runs low, the transmitter will continue to
sound the “DiDiDi...” alarm.
2) Connect the USB charging cable to the charging interface.
3) Plug the USB charging cable into a USB charging port on power bank or
USB adapter (5V/2.0A).
4) The red indicator light on the transmitter will turn on when the battery is
charging, and will turn off when the battery is fully charged.
5) Charging time: about 60 minutes.
· Before charging, please check the contents of the “Use of Battery”
section of the “Safety Guidelines” carefully!