Holy Stone HS600 - Propellers

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A
B
B
A
-14-
9.4 Propellers
HEAD
Installation: After distinguishing the corresponding A/B fan blades, when
installing the corresponding fan blades, align the propeller against the
clamp of the motor shaft, press the blade down and then follow the
direction of the lock icon “ ” on the fan blade to lock the blade.
Removal: To disassemble, press the blade down, and then spin the blade
out in the direction according to the unlock icon “ ” on the fan blade.
9.5 Landing Gear
As shown in the picture above, please unfold the two front landing gears
separately.
1
3
2