Holy Stone HS600 - Transmitter Battery

-18-
10.2 Transmitter Battery
① Please charge the battery in the closed state. Connect the Battery to the
USB Charging Cable.
② Connect the USB Charging Cable with Power Bank or a USB Adapter
(5V/3.0A ) for charging.
③ When the battery is charging, the indicator lights on the battery will flash
blue.
④ When the battery is full charged, all four blue indicators on the battery
will turn solid.
⑤ The charging time is about 4.5 hours.
USB Adapter
(5V/3.0A)
Power Bank
① Please charge the battery in the closed state. Connect the Transmitter to
the USB Charging Cable.
② Connect the USB Charging Cable with Power Bank or a USB Adapter
(5V/3.0A ) for charging.
③ When charging, “CHARGING” will be displayed on the LCD screen.
④ When fully charged, “CHARGE DONE” will be displayed on the LCD
screen.
⑤ It takes approximately 2 hours to fully charge the transmitter.
·Before charging, please check the contents of the “Use of Battery”
section of the “ Safety Guidelines” carefully!