- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A B
B A
-13-
7.2 Propellers
Installation: The drone will not fly unless the correct propeller is installed
on the correct motor shaft. See illustration above. An “A” or “B” printed on
the back of each propeller. Lock the propeller to the motor shaft with
screws. Please rotate each screw clockwise.
HEAD
Removal: For propeller removal, use the screwdriver (included) to rotate
the screws counterclockwise and remove propeller.
To Next Page
Loading...
