-33-
11.5 TapFly
1. Please click on the Map first, then click the “ ” icon, and follow the
prompt box to enter the TapFly function.
MODE 1: Click the “ ” icon on the app interface, draw a line on the
screen to create a path, click “ ” icon to submit the route, and the
drone will fly along the path.
MODE 2: Click the “ ” icon on the app interface, set any point on
the screen, click “ ” icon to submit the route. The drone will now
fly along the path according to the points connected on the map.
2. Exit the TapFly mode by clicking the “ ” icon again.
3. If the flight path submission fails, you can choose to re-submit or exit
again.
·DO NOT fly the drone towards people, animals, or small/fine objects
(e.g. tree branches and power lines) or transparent objects (e.g. glass
or water).
·There may be some deviation between the expected and actual
flight path.
It is recommended to enlarge the map if you want to use TapFly.
To Next Page
Loading...
