Introduction
TF 50 E | Version 1.05 3
1 Introduction
Congratulations on purchasing your HOLZSTAR table
router.
Please read the operating instructions carefully
before commissioning.
They contain important information relating to proper
commissioning, the intended use as well as the safe and
efficient operation and maintenance of your table router.
The operating instructions form part of the table router.
Always keep these operating instructions at the place
where you use your table router. Please also observe the
local accident prevention regulations and general safety
regulations relating to the different application areas of
your table router.
1.1 Copyright
The contents of these instructions are protected by
copyright and are the sole property of Stürmer
Maschinen GmbH.
Use of these instructions is permitted within the scope of
machine use. An application beyond the described
application is not allowed without written approval of the
manufacturer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not
explicitly permitted.
Contraventions are liable to compensation.
We register trademark, patent and design rights to
protect our products, insofar as this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property
1.2 Customer service
Please contact your specialist dealer if you have
questions about the table router or need technical
assistance. They will help you with specialist information
and expert advice.
Germany:
Stürmer Maschinen GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt, Germany
Repair service:
Fax: 0049 (0)951 96555-111
Email: service@stuermer-maschinen.de
Internet: www.holzstar.de
Spare part order:
Fax: 0049 (0)951 96555-119
Email: ersatzteile@stuermer-maschinen.de
We are always interested in information and experiences
that result from the application and can be valuable for
the improvement of our products.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while taking applicable standards and
rules, the state-of-the-art technology and our long-term
knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of these operating instructions
- Inappropriate use
- Deployment of untrained staff
- Unauthorised modifications
- Technical changes
- Use of not allowed spare parts
The actual scope of delivery may deviate from the
explanations and presentations described here in case
of special models, when using additional ordering
options or due to latest technical modifications.
The obligations agreed in the delivery contract, the
general terms and conditions as well as the delivery
conditions of the manufacturer and the legal regulations
at the time of the conclusion of the contract are
applicable.
2 Safety
This section gives an overview of all the important safety
packages for protecting personnel and for safe, trouble-
free operation. Other task-based safety notes are
included in the individual chapters.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are
highlighted by symbols. The safety notes are introduced
by signal words which express the concern of the risk.
To Next Page
Loading...