Holzstar TF 50 E - Tips and Recommendations; Obligations of the Operating Company

4 TF 50 E | Version 1.05
Safety
It is necessary to observe the safety notes quoted in
these operating instructions in order to reduce the risks
for personal injuries and damages to property.
2.2 Obligations of the operating company
The operating company or operator is the person who
independently operates the machine for commercial
reasons, or leaves it to a third party for use or
application, and who bears the legal product
responsibility for the protection of the user, the staff or for
third parties.
Obligations of the operating company:
If the machine is used for commercial purposes, the
operating company must comply with the legal working
safety regulations. Therefore, the safety notes in this
operating manual, as well as the safety, accident
prevention and environment protection regulations
applying for the area of application of the machine must
be met. The following applies in particular:
- The operating company must be informed about
the applicable industrial safety regulations and
conduct a risk assessment to identify additional
hazards resulting from the special working
conditions at the machine's place of use.
The company must include this information in
operating manuals for operating the machine.
- Throughout the lifetime of the machine, the
operating company must verify whether the
operating manuals it has prepared correspond to
the latest regulations, and adapt them,
if necessary.
- The operating company must unambiguously
regulate and determine the responsibilities for
installation, operation, troubleshooting,
maintenance and cleaning.
- The operating company must ensure that all
persons who work with the machine have read and
understood this manual. Furthermore, the
company must instruct the staff and inform them
about hazards at regular intervals.
- The operator must provide the necessary
protective equipment to the staff and order the use
of the necessary protective equipment in a binding
way.
Furthermore, the operating company is responsible for
maintaining the machine in a technically flawless state.
Thus, the following applies:
- The operator must ensure that the maintenance
intervals described in this manual are observed.
- The operator must have all safety devices checked
regularly for their good working order and their
integrity.
DANGER!
This combination of symbol and signal word indicates
an imminently hazardous situation which will result in
death or serious injury if not avoided.
WARNING!
This combination of symbol and signal word indicates
a potentially dangerous situation that will result in
death or serious injury if not avoided.
CAUTION!
This combination of symbol and signal word indicates
a potentially hazardous situation which may result in
minor or slight injury if not avoided.
ATTENTION!
This combination of symbol and signal word indicates
a potentially hazardous situation which may result in
damage to property and the environment if not
avoided.
NOTE!
This combination of symbol and signal word indicates
a potentially hazardous situation which may result in
damage to property and the environment if not
avoided.
Tips and recommendations
This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation.