Introduction
TKS Serie | Version 1.04 3
1 Introduction
You have made an excellent choice in purchasing a
HOLZSTAR Circular Table Saw.
Carefully read the operating instructions priorto
commissioning.
They describe correct commissioning, intended use and
safe as well as efficient operation and maintenance of
the Circular Table Saw.
The operating instructions form part of the Circular Table
Saw. Always keep them at the Circular Table Saw loca-
tion of use. Please also observe the local accident pre-
vention regulations and general safety regulations for the
use of the Circular Table Saw.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their use is permitted within the con-
text of using the Circular Table Saw. Any further use
shall not be permitted without written consent by the ma-
nufacturer.
To protect our products, we register our rights to our
brands, patents and designs where possible in each in-
dividual case. We take strong action against any viola-
tion of our intellectual property.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your Circular Table Saw or require
any technical information. Your specialist retailer will be
happy to support you with specialist advice and informa-
tion.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0049(0)951 96555-111
E-Mail: service@stuermer-maschinen.de
Internet: www.holzstar.de
Spare parts orders:
Fax: 0049(0)951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
Please submit any information and experiences you
make during application of the machine as these may be
valuable for product improvements.
1.3 Disclaimer
All data in this operation manual has been compiled on
the basis of the state-of-the-art, valid standards and gui-
delines as well as our many years of expertise and ex-
perience.
The manufacturer shall not be liable for damage in the
following cases:
- Failure to comply with the operation manual,
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the des-
criptions and illustrations in this document as a re-sult of
special variants, optional extras or recent, technical mo-
difications.
The obligations defined in the supply contract shall ap-
ply in addition to the general terms and conditions and
the manufacturer's general terms and conditions as well
as the statutory regulations valid at the time of the con-
clusion of the contract.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and re-
liable operation. The individual sections contain additio-
nal, taskspecific safety information.
2.1 Legend of symbols
Safety instructions
Safety instructions in this operation manual have been
highlighted with symbols. Safety instructions are indicated
by signal terms that express the degree of risk involved.
WARNING!
This combination of symbol and signal term indica-
tes a potentially dangerous situation which may
cause death or serious injury if not averted.
WARNUNG!
This combination of symbol and signal term indica-
tes a immediate dangerous situation which may
cause death or serious injury if not averted.
To Next Page
Loading...
