Honda BF2D - Engine Oil Service

AMBIENT TEMPERATURE
0.26 US qt (0.25 L)
42
Engine Oil Recommendations
SERVICING YOUR OUTBOARD MOTOR
OIL FILLER CAP
OIL FILLER HOLE
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down a
drain.
Remove the engine cover.
Engine oil refill capacity:
Oil is a major factor affecting
performance and service life. Use
4-stroke automotive detergent oil.
Remove the oil filler cap and fill
the crankcase with the
recommended oil up to the upper
limit mark on the oil level
inspection window.
Stand the outboard motor in a
vertical position, and install a new
washer and the oil drain screw
securely.
Install the oil filler cap and tighten
it securely.
Install the engine cover.
Install the outboard on the boat.
SAE 10W-30 is recommended for
general use.
Honda 10W-30 FC-W outboard
motor oil is suggested for general use.
Suggested oil:
The SAE oil viscosity and service
category are in the API label on the
oil container. Honda recommends
that you use API Service category
SG, SH or SJ oil with the ‘‘starburst’’
certification mark displayed on the
container.
5.
6.
7.
8.
9.
10.
TM
09/04/17 16:13:15 31ZW6601_043