OPERATION
STOPPING THE ENGINE
Emergency Engine Stopping
’
Disengage the emergency engine stop switch clip from the engine stop switch
by pulling the lanyard.
It is a good idea to stop the engine with the emergency engine stop switch
lanyard from time to time to be sure that the switch is operating properly.
RGENCY ENGINE STOP
Normal Engine Stopping
SWITCH CLIP
1. Turn the throttle grip to the SHIFT position, and move the gearshift lever to
the N (neutral) position.
\
I Ll
2. Push the engine stop switch button until the engine stops.
In the event that the engine does not stop when you push the engine stop
switch, pull the emergency engine stop switch lanyard. If the engine continues
to run, pull the choke knob to stop the engine.
34
To Next Page
Loading...
