EasyManua.ls Logo

Honda BF8A - Battery Does Not Charge; Fuse Replacement

Honda BF8A
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TAKING CARE OF UNEXPECTED PROBLEMS
BATTERY DOES NOT CHARGE
The battery-charging circuit is protected by a 5ampere fuse.
If the fuse burns out, running the engine will not charge the battery.
Fuse Replacement
1. With the engine stopped, remove the engine cover.
2. Pull the rubber cover off the end of the fuse holder, and unscrew the fuse
holder cap.
3. Remove and inspect the
5 A fuse.
fuse. If the fuse is burnt out, install
a
replacement
FUSE HOLDER
FUSE (5A)
Never use a fuse with a rating greater than 5 amperes. Serious damage to
the electrical system could result.
4. Reinstall the fuse holder and engine cover.
Before further operation, try to determine and correct the electrical problem
that caused the fuse to burn out. An uncorrected electrical problem may cause
the fuse to burn out again.

Table of Contents

Related product manuals