3. Adjust the drive chain.
P.60
4. Install and tighten the rear axle nut.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft).
5. After installing the wheel, apply the
brake pedal several times, then recheck
the disc for caliper holder to disc
clearance. Do not operate the motorcycle
without adequate clearance.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
To Next Page
Loading...
