When the Idling Stop system does not operate properly, perform the followings.
Engine is cold. Warm up the engine.
Throttle is not
closed completely.
Close the throttle completely.
Did not ride the
scooter after engine
start.
Engine does not
stop by Idling
Stop system
Idling Stop switch is
at ‘‘ ’’.
Push the Idling Stop switch to ‘‘
’’.
Scooter does not
stop completely.
Stop the scooter completely. The Idling
Stop system operates if the speed is only
at0km/h(0mph).
Ride the scooter at speeds of over 10 km/
h (6 mph). The Idling Stop system does
not operate until you ride at once.
When the Idling Stop system does not operate properly
(Idling Stop switch is at ‘‘IDLING STOP’’ position)
Symptom Possible cause What to do
IDLING
IDLING
STOP
57
10/02/17 16:56:26 32KWN600_067
To Next Page
Loading...
