Honeywell Home T6 Pro Smart User Manual

10
To configure and control your T6 Pro Smart
thermostat remotely, the thermostat needs to be
connected to the Honeywell Home app through
your home’s WiFi network. Follow the simple
steps below to get connected.
1 Make sure your smartphone or tablet is
connected to a 2.4 GHz WiFi signal. (Many
WiFi routers broadcast both a 2.4 GHz
signal and a 5.0 GHz signal. If given the
option, choose the 2.4 GHz signal.)
2 Download the Honeywell Home app from
the App Store or Google Play if you haven’t
already.
3 Open the Honeywell Home app. Log in to
your account, if needed create an account.
Tap Add Device and follow the prompts in the
App.
WiFi connection status
The thermostat’s WiFi connection status is
located in the upper-right corner of the screen.
To troubleshoot WiFi connectivity issues, see
the FAQs on page 31.
• WiFi is connected
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
• WiFi is disconnected or WiFi isn’t set up
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
• WiFi is turned off
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
Connecting to a WiFi network
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off

Honeywell Home T6 Pro Smart Specifications

General

Brand	Honeywell Home
Model	T6 Pro Smart
Category	Thermostat
Language	English