Honeywell 1000 Series - User Manual

INSTRUCTION SHEET
S4565/S4575/S4585 SERIES
IGNITION CONTROLS FOR COMBINED VALVE AND IGNITION SYSTEM
EN1R--9161 0006R10--NE
”Old”-- style
”New”-- style
APPLICATION
The Combined Valve and Ignition system (CVI) has specially
been developed for application in gas fired appliances with
either intermittent pilot or direct burner ignition.
For this system, the VK41../VK81.. series gas controls have
been designed to have the S4565/S4575/S4585 series
ignition controls attached directly onto the valve.
The combined system then provides programmed safe light
up, flame s upervision and regulation of gas flow to the main
burner and/or pilot burner of the appliance.
DESCRIPTION
The S4565/S4575 ignition controls provide automatic ignition
for direct gas burner applications and for intermittent pilot gas
burner applications with safety timer.
The S4565/S4575 ignition controls are not intended for direct
exposure to flame envelope.
The S4585 ignition controls provide automatic ignition for
intermittent pilot gas burner applications without safety timer.
The S4565/S4575/S4585 ignition controls are designed to
meet the european standards:
EN 298: Automatic gas burner control systems.
EN 60730--1: Automatic electrical controls for house hold
and similar use.
The S4565/S4575/S4585 ignition controls can be used in
appliances according European standard for household
electrical requirements EN 60335 series.
The S4565/S4575 ignition controls are approved on the North
American standard ANS Z21.20 Automatic Ignition Systems.
NOTE: S4565SD is not an ignition control but an ignition
circuit and rectifier only
Contents
Page
Dimensional drawing 2................................
Features 3...........................................
S4565A,B,P,Q 3.......................................
S4565C,D,R,T 4.......................................
S4565AD,BD,CD,DD,PD,QD,RD,TD “1000” series 7......
S4565AD,BD,CD,DD,PD,QD,RD,SD,TD “2000” series 13..
S4565AF,BF,CF,DF,EF,PF,QF, RF, TF 18..................
S4575A,B,C,D,P,Q,R,T 23..............................
S4585D 26...........................................
General c onsiderations 27.............................
Electrical connections 28..............................
Subject to change without notice. Printed in the Netherlands.

Honeywell 1000 Series Specifications

General

Housing Material	Plastic
Control Modes	PID, On/Off
Communication	RS-485
Power Supply	24V DC
Input Voltage	24V DC
Outputs	Digital and Analog

Summary

Key Features of Honeywell Ignition Controls

Flame Supervision and Ignition Capabilities

Features include flame supervision and built-in ignition systems.

S4565 A, B, P, Q Series Ignition Control Specifications

System Operation for S4565 A, B, P, Q Controls

General Operation and Lock-out Reset Procedures

Explains general operation and how to reset lock-out conditions.

S4565 C, D, R, T Series Ignition Control Specifications

Model, Supply, Power, and Humidity Specs

Covers models, supply voltage, power consumption, and humidity.

S4565 C, D, R, T Series Specifications (Continued)

System Operation for S4565 C, R, D, T Controls

S4565 AD, BD, CD, DD, PD, QD, RD, TD 1000-SERIES Ignition Control Specifications

S4565 AD, BD, QD Series Connection Diagrams

S4565 AD and BD Wiring Diagrams

Wiring diagram for S4565AD and BD models.

S4565 BD and QD Gas;Air Wiring

Wiring for S4565BD and QD in gas/air applications.

S4565 CD, DD, PD, QD Series Connection Diagrams

S4565 CD and DD Wiring Diagrams

Wiring diagram for S4565CD and DD models.

S4565 QD with External Ignition Circuit

Wiring diagram for S4565QD with external ignition.

S4565 PD and QD Wiring Diagrams

System Operation for S4565 AD-TD Series

S4565 AD-TD 2000 Series Ignition Control Specifications

System Operation for S4565 SD, CD, RD, DD, TD Series

S4565 SD Operation and Lock-out Procedures

Operation details and lock-out procedures for S4565SD.

System Operation for S4565 AD-TD Series (Continued)

Functional Diagrams for AD, PD, BD, QD Models

S4565 AF, BF, CF, DF, PF, QF, RF, TF Series Ignition Control Specifications

S4565 AF-TF Series Specifications (Continued)

System Operation for S4565 AF-TF Series

System Operation for S4565 AF-TF Series (Continued)

Functional Diagrams for AF, PF, BF, QF Models

Functional Diagrams for CF, RF, DF, TF Models

S4575 A, B, P, Q Series Ignition Control Specifications

Model Identification and Supply Voltage

Details models and supply voltage requirements.

System Operation for S4575 A, B, P, Q Series

General Operation and Lock-out Reset

General operation principles and lock-out reset procedures.

Functional Diagrams for S4575 A, P, B, Q

S4585 D Intermittent Pilot Ignition Control Specifications

Model, Supply, Power, and Humidity

System Operation for S4585 D Ignition Control

Atmospheric and Fan Assisted Operation

Operation details for atmospheric and fan assisted S4585D.

Electrical Connections and Wiring Guide

General Wiring Safety Precautions

Essential safety precautions for wiring the ignition control.

Cable Assembly and IP Protection

Instructions for cable assembly and IP44 protection.

Spark Gap and Supply Polarity Requirements

Details on spark gap and correct power supply polarity.

Final Checkout and Housing Options

Installation Checkout Procedure

Steps for performing the final installation checkout.

Housing Enclosure Options and Part Numbers