7 - 21
UPC-E0 Addenda Required
When Addenda Required is set to on, the imager will only read UPC-E bar-
codes that have addenda.
Default = Not Required.
UPC-E0 Addenda Separator
When this feature is on, there is a space between the data from the barcode
and the data from the addenda. When turned off, there is no space.
Default = On.
UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end of
the scanned data or not.
Default = On.
To Next Page
Loading...
