Honeywell 4600g - Overall Checksum; Wand Emulation Transmission Rate

6 - 4
Overall Checksum
When this option is turned on, a computed check character is added at the end
of the entire message. The check character is the character which when Exclu-
sive-OR’d with every preceding character of the message yields a result of 0x00
(00H).
Default = Off.
Wand Emulation Transmission Rate
The Transmission Rate is limited by the terminal’s ability to receive data without
dropping characters.
Default = 25 inches/second.
On
* Off
10
80
* 25
40
120
150
200