Honeywell 4600g - Posicode

7 - 31
PosiCode
<Default All PosiCode Settings>
PosiCode A and B
You have to have PosiCode A and B on to read any of the PosiCode symbolo-
gies.
PosiCode Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 7-2) for additional information. Minimum and
Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 48.
* On
Off
A and B On
(No Limited)
A and B and Limited A On
(Limited B Off)
* A and B and Limited B On
(Limited A Off)
Minimum Message Length
Maximum Message Length