Honeywell 4600g - Postnet

12 - 25
Imaging Default Commands
Default all Imaging Commands IMGDFT 8-1
Image Snap Imaging Style - Decoding SNPSTY0 8-2
*Imaging Style - Photo SNPSTY1 8-2
Imaging Style - Manual SNPSTY2 8-2
Beeper On SNPBEP1 8-2
*Beeper Off SNPBEP0 8-2
Exposure (1-7874
microseconds)
SNPEXP 8-3
*Gain - None SNPGAN1 8-4
Gain - Medium SNPGAN2 8-4
Gain - Heavy SNPGAN4 8-4
Gain - Maximum SNPGAN8 8-4
Delta for Acceptance (0-255)
*25
SNPDEL### 8-4
*LED State - Off SNPLED0 8-3
LED State - On SNPLED1 8-3
*Wait for Trigger Off SNPTRG0 8-2
Wait for Trigger On SNPTRG1 8-2
Update Tries (0-10) *6 SNPTRY## 8-4
Target White Value (0-255)
*125
SNPWHT### 8-4
Target Set Point Percentage
(1-99) *50
SNPPCT## 8-5
Image Ship *Infinity Filter - Off IMGINF0 8-6
Infinity Filter - On IMGINF1 8-6
*Compensation Off IMGCOR0 8-6
Compensation On IMGCOR1 8-6
*Pixel Depth - 8 bits/pixel
(grayscale)
IMGBPP8 8-6
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 8-6
*Don’t Sharpen Edges IMGEDG0 8-7
Selection
Setting
* Indicates default
Serial
Command
# Indicates a
numeric entry
Page