Honeywell 7847i-E - SECTION 5: Programmer Keyboard Commands; Programmer Keyboard Commands

5-1
SECTION 5
Programmer Keyboard Commands
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Programmer Keyboard Commands
Programmer keyboard commands can be used to quickly view your Internet connectivity
settings and options. Most commands require you to press the [shift] key and then the
[A]
7847i-e
x.x.xx mm/dd/yy
Software Revision
Depending on unit being programmed, either "7847i" or
"7847i-e" will be displayed.
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the
revision.
[B]
MAC xxxxxxxxxxxx
MAC CRC xxxx
MAC Address
“xxxxxxxxxxxx” indicates the 7847i-E's unique
identification number.
"xxxx" indicates the MAC CRC number. This number is
also found on the label on the module, as well as the
label on the box.
[C]
Mon 23 Jul 2007
03:45:23 am
Time
Retrieves the current date and time from the receiver
in Greenwich Mean Time (GMT). This display confirms
that the module is in sync with network.
[D]
Physical Link:
GOOD
Network Diagnostics Display
Indicates whether device has detected a physical
connection to the internet.
Press the [space] key to go to the next field.
NIC IP Address:
xxx.xxx.xxx.xxx
IP Information Display
Displays the IP address assigned to this device.
Press the [space] key to go to the next field.
Subnet Mask:
xxx.xxx.xxx.xxx
Displays the 32-bit address mask used to indicate the
portion (bits) of the IP address that is being used for
the subnet address.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
Gateway IP Address:
xxx.xxx.xxx.xxx
Displays the IP address assigned to the Gateway.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
DNS Server IP:
xxx.xxx.xxx.xxx
Displays the IP address assigned to the DNS (Domain
Name System) server.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
Encryption Test:
AES Passed!
Performs a self-test of the chosen encryption algorithm.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.