Installation instructions / ACS-2 plus 83
Connection diagram for:
023330 - 023343 contactless proX2 reader Siedle
If only one reader is used, it is always connected as reader 1.
Terminal assignment ACS-2 plus : Settings of the DIP switches located on the CPU board of
the ACS-2 plus (see chapter 9.6):
Switch
block
DIP Setting Designation Reader
S2
1 OFF Clock 1
Pull
down
1
2 OFF Data 1
3 OFF Clock 2
2
4 OFF Data 2
5 ON Clock 1
Pull up
1
6 ON Data 1
7 ON Clock 2
2
8 ON Data 2
To Next Page
Loading...
