84 Installation instructions / ACS-2 plus
Connection diagram for:
027575 Contactless reader “Plug in”
027575.20 Contactless reader “Plug in”
027577 Mifare reader “Plug in”
027579 Legic reader “Plug in”
If only one reader is used, this reader is always connected as reader 1.
ACS-2 plus terminal assignment: DIP switch positions on the CPU board of the ACS-2 plus
(see chapter 8.5):
Switch
block
DIP Position Designation Reader
S2
1 ON Clock 1
Pull
down
1
2 ON Data 1
3 ON Clock 2
2
4 ON Data 2
5 OFF Clock 1
Pull
up
1
6 OFF Data 1
7 OFF Clock 2
2
8 OFF Data 2
To Next Page
Loading...
