SECTION 5: User Codes
5–5
SCREEN ACTION
5. Touch the box next to Enter User
Code… The "User Authorization" screen
is displayed with the instructions "Enter 4
Digits".
6. Enter the 4-digit code for this user.
The “User Options” screen is displayed
with the user’s name and code displayed.
7. Select the partitions, access level, and
enter a user number for this user.
If assigning this user to wireless key, enter
one of the zone numbers of the keyfob
(the wireless key must be programmed
first before it can be assigned to a user).
8. Press the Save button. The system
will save the configuration. When the
save is complete, the User Setup screen
is displayed with the new user’s name
shown.
To Next Page
Loading...
