Honeywell BW Flex Series User Manual

3. Single press to switch Languages, and Press and hold to select it. After you select the
language, the Time setup is displayed.
4. Single press to switch Hours, Minutes, and Seconds; press and hold to select. After you set
the time, the Date menu is displayed.
5. Single press to switch Month, Day, and Year.
6. Press, and Hold to save data. The detector goes to the Regular mode.
Configure the detector via DC on a Mobile Device
1. Turn on the detector and the mobile device.
2. Pair your detector with the mobile device. For a detail pairing process, go to See "Bluetooth
Pairing" on page13 for more information..
3. After pairing, the Quick Setup window requests to Continue or Cancel. Tap OK to continue.
4. Choose Language and Time Zone, and then tap Save to complete the setup.
Configure the detector via SSDC on a computer
Configure the detector via the Safety Suite Device Configurator (SSDC) software. You can
download SSDC from: https://explore.honeywell.com/safety_suite_device_configurator.html
1. Connect the detector to a computer via IR Link.
2. Open the SSDC software.
3. Click on the Device List View tab.
4. Click Refresh to scan for devices.
5. Select the detector’s serial number. The Out of Box popup window is displayed.
6. Choose language and time zone, then click SET to complete the process.
BW Flex Series 10 User Manual

Honeywell BW Flex Series Specifications

General

Brand	Honeywell
Model	BW Flex Series
Category	Gas Detectors
Language	English