Honeywell BW Flex Series User Manual

TWA Alarm Setpoint by sensor
When the detector has passed all the start-up self-tests, it enters the regular operation mode.
Sensor's Auto Zero is disabled by default but can be customized by the user.
Note: We strongly recommend to review the Alarm Settings after Start-Up.
Deactivate the Detector
To deactivate your Honeywell BW™ Flex Series detector, press the button, and hold for four
seconds.
The detector beeps and vibrates, and the alarm LEDs light red.
Common Button Operations
Feature Operation
Power On 4-second hold
Power Off 4-second hold
Enter the menu Double-Press
Exit the menu (on Exit screen) Press and hold
Move to Next Option menu Single-Press
Initiate Selected Option 3-second hold
Acknowledge latched alarm 1-second hold
Backlight Single-Press
BW Flex Series 12 User Manual

Honeywell BW Flex Series Specifications

General

Brand	Honeywell
Model	BW Flex Series
Category	Gas Detectors
Language	English