Honeywell BW Flex Series User Manual

7. Attach the hose.
8. use any of the following three ways to select the gas cylinder, and then click START.
Scanning: Scan the bar code from the cylinder
Selecting: Choose the Last Time User cylinder information
Typing: Manual input of the gas concentration
BW Flex Series 18 User Manual
6. After the Zero calibration is completed, place the cap over the detector, and then press down
on both tabs to snap it into place.

Honeywell BW Flex Series Specifications

General

Brand	Honeywell
Model	BW Flex Series
Category	Gas Detectors
Language	English