Antenna Installation
Attach the antenna by opening the compartment, aligning the antenna, and turning the base of
the antenna until it is snug. (Tighten by turning clockwise, and loosen by turning
counterclockwise.)
A number is marked on the antenna body for easy identification:
Description P/N Mark on body
Antenna 868-928MHz, RP-N** 550-7056-000 0188-1101
Antenna 2.4GHz, RP-N** 550-7057-000 0188-3101
** Depends on wireless modem (if installed).
Antenna
IMPORTANT!
Make sure the antenna type is correct, or wireless communication distance will be reduced.
Always tighten the antenna completely. Failure to do so will result in reduced communication
distance.
BW RigRat 81 User Manual
To Next Page
Loading...
