Honeywell BW RigRat - Manual Alarms Test

Program/Menu/Configuration Mode
Type Red LED
Yellow
LED
Green
LED
Buzzer LCD Display Reading Notes
Program
mode
1 beeps/s
In menu or
configuration
screens
For bump/cal
operation, changing
configuration
Hardware
test
Hardware
test
pattern
Hardware
test
pattern
Hardware
test
pattern
Hardware
test
pattern
Device Startup
Type Red LED Yellow LED Green LED Buzzer LCD Display Reading
Startup Startup pattern Startup pattern Startup pattern Startup pattern
Manual Alarms Test
Under Normal Operation Mode and non-alarm conditions, the buzzer (audible alarm) and
visible alarms can all be tested anytime by turning off the instrument or bump testing the
instrument. If any alarm does not respond, check the alarm settings to make sure all alarms are
enabled. If any alarms are enabled but not functional, the instrument should not be used.
Contact Technical Support.
BW RigRat 91 User Manual