Honeywell BW Solo - Technical Specifications

Honeywell BW Solo User Manual
47
19. Honeywell BW Solo Specifications
Size
2.74" H x 2.63" W x 1.42" D (69.7 x 66.7 x 36.1 mm) 1-Series sensor models
2.74" H x 2.63" W x 1.61" D (69.7 x 66.7 x 41 mm) 4-Series Series sensor models
Weight
3.56 oz. (101g) without Sensor/3.63~4.09 oz.(103~116g) with different sensors
Sensor
17 field-replaceable electrochemical sensors for toxics and oxygen
Battery Options
• ER14335 2/3AA lithium thionyl chloride battery (Over 1 year runtime)
Display
• FSTN dot matrix LCD display (128 x 64) with backlighting (activated
automatically with button press)
Display Readout
• Real-time reading of gas concentrations; battery status; wireless on/off.
• Various instrument status-related information
Control
1 button (single press, double press, short hold, long hold)
Sampling
Diffusion
Calibration
Automatic with IntelliDoX, or manual
Alarms
• Multi-tone audible (95 dB @ 30 cm/12”), vibration, visible (flashing bright red
LEDs), and on-screen indication of alarm conditions
• Real-time remote alarm notification (Wireless Model Only).
Datalogging
• Continuous datalogging (six months at 5 second intervals, running continuously)
• User-configurable datalogging interval (1 to 300 seconds)
Communication
and
Data Download
• Data download and instrument setup and upgrades on PC via IntelliDoX or BLE
(Wireless Model Only) or on cell phone via BLE (Wireless Model Only)
• Wireless data and status transmission via built-in BLE (Wireless Model Only).
Wireless Network
BLE (Bluetooth Low Energy)
Wireless
Frequency
Bluetooth 2402~2480MHz
Wireless
Approvals
FCC ID: SU3BWS1
IC: 20969-BWS1
RE-D Directive 2014/53/EU
Operating
Temperature
-40° to 140° F (-40° to 60° C)
Refer to specific measurement operating range of different sensors.
Specifications subject to change