Honeywell BW Ultra - Navigate the Menu; View Detectors General Information

Navigate the Menu
There are four main menu items.
l
See Information
l
Start Bump Test
l
Zero Sensors
l
Start Calibration
1. Double pressing the button displays all four options on the screen. See Information is
selected and highlighted by default.
2. Press the button to transition the selection to the next choice.
3. Press and hold for three seconds to enter the selected option.
4. Follow on-screen instructions for your selected operation. Most of the detector’s
procedures are described in this guide.
View Detector's General Information
1. Double-press the button to enter the main menu.
2. Select See information and press the button to scroll through the following information:
Peak readings
STEL readings
TWA readings
Bump test intervals
Calibration
BLE information (BLE should be enabled)
LEL Correction Factor
Low Alam setpoint
Pairing Code
Hi Alam setpoints
STEL setpoints
TWA setpoints
BW Ultra 23 User Manual