Set Up the Confidence and Compliance Beep Interval 27
Select an Operation Mode 28
Essentials Mode 28
Hole Watch Mode 28
Inert Mode 28
Configure the Detector 29
Connect with IntelliDoX® 30
Connect with an IR Link 30
Select PID Correction Factor 31
Alternate Display View in Safety Suite Device Configurator (SSDC) 32
Real Time Clock Display 32
Languages 33
Bluetooth Pairing 33
Caibrate the Detector 33
Replace a Sensor 34
Review Logs 34
Chapter 5 - Maintenance 36
Gas Cylinder Guidelines 36
Charge the Battery 36
Maintain the Battery 36
Clean the Detector 37
Upgrade the Firmware 37
Firmware Downgrade 38
Chapter 6 - Appendices 39
Auto Detect Gas 39
Gas Alarm Setpoints 39
Sample Factory Alarm Setpoints 40
Specifications 40
Standards and Certifications 41
Sensor T90 Ratings 46
BW Ultra 3 User Manual
To Next Page
Loading...
