บริษัท เอดีดี เฟอร์เนส จํากัด
ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 70 ถนนบรมราชชนนี แขวงศาลาธรรมสพน์ เขตทวีวัฒนา กรุงเทพฯ 10170
โทร: 02-888-3472 โทร: ออกแบบ:08-08-170-170 แฟกซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
STANDARDS AND APPROVALS
Models C7061A1020 and F1003
C7061A1020 and F Ultraviolet Flame Detector
conform with following EC-Directives:
•
Gas Appliance Regulation 2016/426/EU.
according to European Standard:
EN 298:2012 approved with R7861A1026, A1034 and
R8001S1071 flame amplifiers.
•
Low Voltage Directive 2014/35/EU
according to European Standard:
EN60730-2-5
•
Electro Magnetic Compatibility Directive 2014/30/EU
according to European Standards:
EN55011 class B regarding emission.
EN50082-2 industrial level regarding immunity.
Model C7061F1003
In addition to above information, C7061F1003 conforms with:
•
Explosive Atmospheres Directive (94/9/EC)
according to European Standards:
EN50014
EN50018
EN50019
REPLACEMENT PARTS AND ACCESORIES
Replacement parts for model C7061A1020 and
C7061F
129464N Ultraviolet Sensing Tube; for -40°F (-40°C)
operation.
Accessories for model C7061A1020 and
124198 Mounting Flange, aluminum, with 1- inch NPT
internal threads for attaching to sight pipe.
Replacement parts for model C7061A
124204
Quartz Focusing Lens rated for 20 Psi (138 kPa);
for increasing the detector-sensed ultraviolet
radiation. Included in C7061F1003.
114372 Quartz Viewing Window; rated for 20 Psi (138
kPa).
Accessories for model C7061A
122748 Quartz Viewing Window rated for 50 Psi (345 kPa).
114465
120739
Gasket, silicone rubber; for installing viewing
window (three required).
Gasket, fiber-neoprene; heat insulation and seal-
off for mounting flange.
To Next Page
Loading...
Need help?
General
