CLIF-CBUSLC INTERFACE – INSTALLATION & COMMISSIONING INSTRUCTIONS
9 EN1Z-1026GE51 R0417
5. Click Let me pick from a list of device drivers on my
computer.
6. Select Network adapters.
7. Select Microsoft.
8. Select USB-RNDIS-Adapter, and then click Next button.
RESULT: The Update Driver Warning message box
displays.
9. Confirm the warning by clicking Yes button.
RESULT: The driver will be installed successfully as
indicated by the final message box.
10. Click the Close button.
Windows 10
In the case of controllers with firmware 4.00.00 or higher, the
appropriate driver is automatically installed with a Windows
update. In the case of controllers with firmware 3.04.05 or
To Next Page
Loading...
