EasyManua.ls Logo

Honeywell CIU 888 - Page 42

Honeywell CIU 888
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning of a Standalone System Setup
Ensite Pro to CIU 888 Migration Manual Part No.: 4417593_Rev09
2 - 16 CIU 888
$*6
3. Configure the additional configuration settings.
4. Click Update to update the additional configuration settings.
Site
Element
Type
Parameter
Name
Description Value Range
Default
Value
CIU Priority Agent Indicates whether Priority Agent is enabled or dis-
abled.
Priority Agent is disabled - CIU 888 scans the field
using a static time based scanning algorithm for
foreground and background scan items. No priority
changes happen based on Product movement and
Tank High Monitoring Limit.
Priority Agent is enabled - CIU 888 scans the field
using a dynamic time scanning algorithm based on
the Product movement and Tank High limit. Rela-
tive scan priorities are done between static tanks
(tanks with no product movement), dynamic tanks
(tanks with product movement), dynamic tanks in
which product level is beyond the configured Tank
high monitoring limit, Tanks with field device com-
munication errors.
See Chapter B section B.6 for Priority Details.
Enabled
Disabled
Enabled
HostPort TRDT Sup-
press Moving
Status
Indicates whether Moving status is suppressed or
not in the CIU888's Modbus Tank record.
Enabled - Moving status suppressed
Disabled - Moving status suppressed
Enabled
Disabled
Disabled
Tank HighLevelMoni-
toringLimit (%)
Indicates the configured % of Tank capacity. CIU
888 scans product level with a higher frequency if
Product level crosses the configured % of Tank
capacity.
double value 90
Flexcon Flexcon Flexcon address of the gauge. 0-1899 0
GPU
Cache
GPU Cache For emulation requests, will this data be received
from cache or directly from the field.
Enabled
Disabled
Enabled
VPN Port IP Address IP address of VPN port Valid IP address 192.168.5.1
VPN Port IP Address IP address of partners VPN port in case of redun-
dant configuration. This field is not used in case of
non redundant configuration.
Valid IP address 192.168.5.2
VPN Port Subnet Mask Input valid subnet for VPN port Valid Subnet
255.255.255.0

Table of Contents

Other manuals for Honeywell CIU 888

Related product manuals