Honeywell CIU 888 - Locking the W&M Relevant Configuration Settings

General CIU 888 Functions
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 5 - 5
$*6
On the CIU 888 display, the status of the W&M lock key switch
changes from (‘locked’) to (‘unlocked’) (see FIGURE 5-7).
FIGURE 5-7 CIU 888 display: W&M relevant configuration settings are unlocked
3. Remove the key from the key switch and store it.
5.2.1.2 Locking the W&M relevant configuration settings
Perform the following steps to lock the W&M relevant configuration
settings of the CIU 888:
1. Take the key for locking/unlocking the W&M relevant configuration
settings.
2. Insert the key in the W&M lock key switch. Next, turn the key
clockwise.
On the CIU 888 display, the status of the W&M lock key switch
changes from (‘unlocked’) to (‘locked’) (see FIGURE 5-8).
FIGURE 5-8 CIU 888 display: W&M relevant configuration settings are locked