Honeywell CIU 888 - Locking the Configuration Settings

General CIU 888 Functions
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 5 - 7
$*6
3. Remove the key from the key switch and store it.
5.2.2.2 Locking the configuration settings
Perform the following steps to lock the configuration settings of the
CIU 888:
1. Take the key for locking/unlocking the configuration settings.
2. Insert the key in the Configuration lock key switch, and then turn the
key clockwise.
On the Status Dashboard, the status of the Configuration lock key
switch changes from (‘unlocked’) to (‘locked’) (see FIGURE
5-11).
FIGURE 5-11 Status Dashboard: configuration settings are locked
3. Remove the key from the key switch and store it.