Honeywell Dolphin CT40 Series - About the Good Read LED; About the Audio Features

14 Dolphin CT40 Mobile Computer
About the Good Read LED
The Scan Status LED indicates the read status of the imager when scanning a bar
code. When active, the LED illuminates the outer ring of the front speaker. To learn
more about how to use and configure the imager engine for scanning, see Chapter
3: Use the Image Engine beginning on page 31.
Good Read LED Descriptions
About the Audio Features
The CT40 has multiple speakers, a microphone, and several software tools to
configure sound volume or enable vibration feedback.
LED Color Description
Green Good read of a bar code.
Blinking green The data collection engine is processing or starting up.
Red Failure to scan bar code.
Check to make sure you have the correct symbology enabled.
Good Read LED