70 Dolphin CT40 Mobile Computer
6. When the scanner is successfully paired with the computer, the scanner name
appears under Connected Device.
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge .
3. Tap the menu icon and then tap Disconnect BT Scanner.
4. Tap Honeywell or Intermec.
5. Scan the Scan to disconnect barcode displayed on screen.
About Serial and USB Communications
You can use these optional Dolphin CT40 series accessories to transmit data to
and receive data from another device through serial or USB communications:
• Home Base
• Ethernet HomeBase
To Next Page
Loading...
