Dolphin CT60/CT60 XP Mobile Computer User Guide 95
The computer automatically runs the upgrade found in the autoinstall folder on
the card. The system update screen appears during the upgrade process. When
the upgrade is finished, the lock screen appears.
9. Once installation is complete, turn Provisioning mode Off.
About the Honeywell Upgrader
Use the Honeywell Upgrader app (HUpgrader) to check for and install OTA
updates, and view the current OTA version installed on the computer.
Install OTA Updates
To use the HUpgrader to install an OTA update file downloaded from the Technical
Support Downloads Portal:
1. Save the OTA file (*.zip) the following folder on the CT60 computer:
• Internal shared storage\Download
2. Tap HUpgrader to open the Honeywell Updater app.
3. Tap , and then tap Select OTA from storage.
4. Select the storage location (i.e., Internal Storage) where you saved the file.
To Next Page
Loading...
