Dolphin CT60/CT60 XP Mobile Computer User Guide 5
About the Battery
The computer uses a rechargeable Li-ion battery as its main power source. Several
factors determine the life of the battery, such as display brightness, display
timeout, input device, extreme temperature, and battery usage. Honeywell
recommends that you keep the battery charged at all times to prevent data loss.
Dolphin CT60 computers are designed for use with battery model CT50-BTSC
manufactured for Honeywell International Inc. When ordering a replacement
battery, it is important to order by part number and not only by model number.
See Battery Part Numbers on page 6 for guidance on the correct battery part
number for your unit configuration.
For a list of compatible accessories for the CT60 mobile computer series and their
part numbers, see the CT60 and CT60 XP Accessory Guide, available for download
from the CT60 product page at sps.honeywell.com.
Contact your local sales representative for replacement battery ordering
information.
Important Information
About CT60 Non-Incendive Models
(CT60-L0N-xxCxx1F, CT60-L1N-xxCxx1F)
Caution: Read Battery Recommendations and Safety Precautions on page 12
and all cautionary markings on the battery, charging peripheral, and
device using the battery before attempting to install, use, or charge
the battery.
Warning: Explosion Hazard-Batteries must only be changed or charged
in an area known to be non-hazardous. Use ONLY Honeywell
CT60 battery part number 318-055-012.
Avertissement: Risqued’explosion-Les batteries doivent uniquement
être remplacées ou rechargées dans un endroit non dangereux.
Utilisez UNIQUEMENT Honeywell CT60 batterie
P/N 318-055-012.
Warning: Battery must be locked when using the CT60 NI in a hazardous
environment.
Avertissement: La batterie doit être verrouillée lors de l'utilisation du NI
CT60 dans un environnement dangereux.
To Next Page
Loading...
