Dolphin CT60/CT60 XP Mobile Computer User Guide 15
4. Follow the on-screen prompts to complete the setup.
5. Exit the Settings app.
Select a Touch Screen Profile to Optimize Performance
Optimize screen interactions by selecting a touch screen profile designed
specifically for your use case. For example, if you wear gloves, set the touch screen
profile to Glove enhance mode for the best touch screen response.
Note: Maximum glove thickness of 2 mm (0.08 inches) for touch screen response.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Touch Screen Profile.
3. Choose one of the following options:
• Normal mode
• Finger enhance mode
• Glove enhance mode
• Stylus enhance mode
• Screen protector mode - For extreme performance units, this mode
optimizes the touch panel tuning when the screen protector is applied.
4. Exit the Settings app.
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight
intensity to conserve power and ensure the display is readable. You can also
manually set the backlight intensity if you do not want to use the automated
adaptive brightness feature.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display.
3. Choose one of the following options:
• To have the computer automatically adjust the brightness for your work
environment, turn on the Adaptive brightness setting. You can tap Adaptive
brightness to toggle the feature on or off.
• To set the brightness level manually, verify the Adaptive brightness feature
is turned off, and tap Brightness level. Adjust the slider to set the brightness
level.
To Next Page
Loading...
