Dolphin CT60/CT60 XP Mobile Computer User Guide 17
Enable Vibrate Mode
You can quickly enable Vibrate mode so the computer vibrates instead of emitting
sound for notifications and rings. If you still want to hear alarms, turn on the
Alarms only feature.
Note: The Vibrate mode varies by OS version.
Depending on OS version:
1. Press the Volume down button until the computer vibrates.
2. To turn on the Alarms only feature, press the Volume Down button again with
the volume slider open.
OR
1. Press one of the Volume buttons until the volume slider appears.
2. Tap to toggle between Vibrate Off and On.
The status bar at the top of the screen indicates the active mode:
• When Vibrate mode is active, appears.
• When Alarms only mode is active, the Do Not Disturb icon appears.
Audio Settings
This section describes the audio and sound settings you can configure in the
Settings app.
• To change audio settings, start Settings and then tap Sound.
To Next Page
Loading...
